Humidity and Temperature Sensor for advanced requirements

A and B Series with RS485 / RS232

Description

• very precise

• temperature range -80...200°C

• pressure-proof up to 25 bar

• IP 65

• with integrated hx processor for determination of the values dew point temperature, mixing ratio, enthalpy, absolute humidity and wet bulb temperature

• on-site adjustment via buttons and LED

• three designs, optional with display (RS485 only)

• AW / AK / BW / BK / BZ

A Series: Plug-and-Measure- exchangable probes
B Series: probes are firmly connected
AB-Serie Prospekt (PDF)

The robust devices are available to be mounted in ducts, on walls, or are available with a stainless steel probe which can be up to 5 m away from the output electronics. Depending on the application, we either recommend using transmitters with exchangeable or permanently assigned probes. The type of filters and filter materials can be adapted to suit the respective protection category required (up to IP65).

All devices work with an internal processor that uses the measured values of the relative humidity and temperature to calculate dew point temperature, enthalpy, absolute humidity, mixing ratio (water/air) or the wet-bulb temperature. Digitalization of the signal processing allows the measurement accuracy for humidity to reach excellent values of ±1.5 % RH, and with the platinum resistance sensor, the accuracy of the temperature measurement reaches tolerances of ±0.15 K. Depending on the individual design, the sensors can be used at temperatures of between -80 °C and +200 °C and at pressures of up to 25 bar in non-corrosive air.

For use in industrial process automation, pharmaceutical industry, automation of production, humidity and temperature measurement in the quality control and many other applications.