當前位置: 首頁 > 產品分類>
elaire T7000系列手持室內空氣品質(IAQ)監測器采用紅外專利技術,可在計算實時通風率的同時精確測量二氧化碳和溫度。Telaire 7000系列還具有數據記錄和RH數據采集功能。
產品應用
確定通風不良或不合標準的區域
確定通風過度的空間中隱藏的節能措施。
確定通風是否是空氣質量投訴的一個因素。
檢測找到燃燒的煙霧源
用作校準壁掛式CO 2和其它類型的CO2傳感器的測量輸出參考
產品特點
獲得專利的雙光束Absorbing Infrared?氣體傳感器可確保長期穩定性和耐用性。
大型,易于閱讀的顯示屏。溫度以°F或°C顯示。CO 2以ppm顯示。輕松調整高度變化。
使用外部端口和顯示器進行快速,簡單的校準。用環境空氣或瓶裝氣體進行校準。
使用機載控件或可選的計算機界面(UIP套件型號2072)校準,設置海拔高度,更改°F或°C
翻轉支架進行桌面監控。通過RJ45連接器輸出的電壓為大多數數據記錄器提供了便捷的接口。
配置交流電源適配器提供外部電源。
使用4節AA堿性電池作為內部電源(產品銷售時不包括在內)可長達80小時。
根據外部差分讀數內的CO 2顯示每人通風量(cfm)。
產品基本參數
Method | Dual Beam Absorption Infrared? |
---|---|
Sample Method | Diffusion or flow through (50 to 100 ml/min) |
Display LCD | Independent CO2 and temperature readings. Calculates and displays ventilation rates. |
Operating Conditions | 32°F to 122°F (0°C to 50°C) |
Storage Temperatures | -4°F to 140°F (-20°C tp 60°C) |
Certification | FCC Class 15 Part B |
Warranty | 18 months parts and labor |
Performance-CO2 Channel | |
Measurement Range | 0 to 10,000 ppm display |
Display Resolution | ±1 ppm |
Accuracy | ±50 ppm or 5% of reading, whichever is greater |
Repeatability | ±20 ppm |
Temperature Dependence | ±0.1% of reading per °C or ±2 ppm per °C, whichever is greater, referenced at 25°C. |
Pressure Dependence | 0.13% of reading per mmHg (corrected via user input for elevation) |
Response Time | <60 seconds for 90% of step change |
Warm-Up Time | <60 seconds at 72°F (22°C) |
Calibration Interval | 12 months, offset adjustment using single gas at 0 to 1000 ppm CO2. Full factory calibration available. |
Performance-Temperature Channel | |
Temperature Range | Voltage output: 32°F to 104°F (0°C to 40°C) |
Display Resolution | 0.1°F (0.1°C) |
Display Options | °F, °C, of off. Set with panel button. |
Accuracy | ±2°F (±1°C) |
Response Time | 20 to 30 minutes (case must equilibrate with environment) |
Calibration Interval | 12 months, offset adjustment using temperature standard at 50°F to 86°F (10°C to 30°C). Full factory calibration available. |